Monitor Stands & Mounts

Perfect Acceleration Sim Racing have teamed up with PRO SIMRIG to provide the aluminium profile frame that all PASR rigs are based around.
Aluminium based monitor stands and mounts which provides a strong & supportive base for your sim racing set up.

Single Monitor Stand

PRO SIMRIG monitor stands are built to stand separately from the rig. This one is for a single monitor.
Separated stand-alone monitor stands (rather than connected to the rig itself) avoid vibrations that come from the rig. This is particularly prominent if a direct drive wheel base is used. Available in silver or black.

The monitor stand is flexible and adjustable both in height and width for your needs.
Up to 32″ monitors: Light version recommended
32.5″+ monitors: Heavy version recommended

Vesa 100: includes vesa 50/75/100 drill pattern plate
Vesa 200: includes vesa 50/75/100/150/200 drill pattern plate

Vesa mounts included? Yes
Bolts and nuts included? Yes

Upgradeable to triple monitors later? Yes

Does your monitor have a recess in the back where the vesa mounts are? You may require fixings for your monitor (to attach your monitor to the vesa mount), please get in touch. If you have any doubts, contact us and we will be happy to assist.

Dimensions

Light:

Height: 1240mm (uprights + feet)
Width: 1200mm (horizontal bar)
Has 40×40 horizontal bar and feet

Heavy:

Height: 1280mm (uprights + feet)
Width: 1200mm (horizontal bar)
Has 40×80 horizontal bar and feet

Buy Here

Triple Monitor Stand

PRO SIMRIG monitor stands are built to stand separately from the sim rig.
The benefit of a stand-alone monitor stand (rather than connected to the rig itself) is that they avoid the vibrations that come from steering wheel and pedal inputs. This can be particularly prominent if a direct drive wheel base is used. Available in silver or black.

The monitor stand is flexible and adjustable boith in height and width for your needs.

Up to 32″ monitors: Light version recommended (important note: Samsung G7 32″ should use the Heavy version)
32.5″+ monitors: Heavy version recommended

Vesa 100: includes vesa 50/75/100 drill pattern plates
Vesa 200: includes vesa 50/75/100/150/200 drill pattern plates

Vesa mounts included? Yes
Bolts and nuts included? Yes

Dimensions

Light

Height: 1240mm (uprights + feet)
Width: 1200mm (horizontal bar)
Arm length: 500mm
Has 40×40 horizontal bar, arms and feet

Heavy

Height: 1280mm (uprights + feet)
Width: 1200mm (horizontal bar)
Arm length: 580mm
Has 40×80 horizontal bar, arms and feet

Buy Here

Single Monitor Mount

Single Monitor Mount from PRO SIMRIG.
Extra strong and rigid due to the 40×80 extrusion that solidifies the design
Thick aluminium side plates
Minor angle adjustments at the extrusion without having to move the side brackets
Comes with a VESA 50/75/100 bracket

There are 2 versions.
– One is designed to fit the PRO SIMRIG PSR1, or another other aluminium extrusion rig where the outside of the uprights (or the inside of the uprights) is 660mm.
– One is designed to fit the PRO SIMRIG PSR3, or another other aluminium extrusion rig where the outside of the uprights (or the inside of the uprights) is 650mm.

Buy Here

Top Monitor Mount

A PRO SIMRIG Top Monitor Stand that can be added to both single and triple Monitor Stands.
Complete kit for mounting the Top-screen Monitor Stand to the single or triple Monitor Stand is included.
Available in aluminium silver or black.

Vesa mount, bolts and nuts also included (to mount vesa mount to the monitor stand).

If you require fixings for your monitor (to attach your monitor to the vesa mount), please get in touch.

Buy Here

Have a question about monitor mounts?

Then drop us a message using the below for and we will get back to you soon.